Install Transmitter Batteries; Charge The Flight Battery - Hobbico Dromida Voyager DIDA0211 Manual

Do NOT overcharge the LiPo flight battery. Maximum voltage
for each battery must be followed.
Do NOT short-circuit the battery. Check polarity before
connecting the battery to the charger.
Remove the battery when it's not in use.
Do NOT operate or charge unattended.
Do NOT use the battery if you do not understand the
warnings and proper use of the battery.
Always let the battery cool and "rest" between uses and
charging. Do NOT charge inside your car.
Inspect the battery before each use for swelling or other
malformation. If the battery has swelled, it MUST be discarded.
Do NOT poke, bend or damage the battery. The outer casing
is soft and can be damaged.
The battery must never exceed 160° F (70° C) for any reason.

CHARGE THE FLIGHT BATTERY

INSTALL
TRANSMITTER BATTERIES
NOTE: The transmitter does not have
to be turned on to charge the battery.
1 Remove the charger
cover on the back of the
transmitter.
2 Plug the battery into the
charger as shown. The red
LED on the front of the
transmitter will come on.
Once the battery is fully
3
charged, the red LED will
turn off.
4 Unplug the battery from the
transmitter and replace the
charger cover.
2
-
+