Parts And Hardware; Prepare The Transmitter - Hobbico FlyZone Micro Ultrix Sky Screamer RTF Manual

Welcome to the world of R/C aero modeling. You will
find your new hobby to be exciting, very interesting and
most of all, a lot of fun. You have purchased, quite
possibly, the best flying, the most reliable and the easiest
flying R/C airplane available today. Be sure to follow the
written instructions and the video instructions
completely and in detail. Doing this will assure you of a
successful first flight and many continued hours of
enjoyment from your new R/C hobby.

PREPARE THE TRANSMITTER

Caution: Do not use rechargeable (NiCd) batteries.
1. Place the transmitter antenna into the top of the
transmitter case as shown above. Tighten it down
"clockwise" until it has a snug fit. Do not overtighten
the antenna.

PARTS AND HARDWARE

Check the parts against the list below. If any parts are
damaged or missing, give us a call at: (217) 398-8970.
Transmitter Antenna (1)
Transmitter (1)
Airplane (1)
Charger (1)
LET'S GET STARTED
2. The transmitter that controls your airplane requires
one alkaline "9V" battery. To install the battery, turn
over the transmitter, remove the battery hatch using a
Phillips screwdriver and install the battery following the
diagram inside the battery compartment.
3
UNPACKING THE BOX
Items not shown:
Instruction Manual (1)
Extra Propellers (2)