VW Passat
Coolant circuit 1.4 TSI
WARNING!
Any coolant running off should be collected in an appropriate container. Install hoses so that they are
kink-free. Unless specified otherwise, always fasten using cable ties. Position clamps so that other hos-
es cannot be damaged. The heater must be filled with coolant when installing the hoses.
The connection should be "inline" based on the following diagram:
All spring clips without a specific designation
1 = Original vehicle spring clip
Connecting pipe without specific designation
1317226C_EN
Ø 20x18
E
Ø 27
Ø 27
Ø 20x18
C
= 25mm dia.
.
= 18x18mm dia.
1
D
A
B
Hose in-
stallation
diagram
21