Coolant Circuit - Webasto Thermo Top Evo 5+ Installation Documentation

Mercedes Benz C-Class S204, W204, C204 / GLK-Class X204

Coolant Circuit

WARNING!
Any coolant running off should be collected in an appropriate container. Install hoses so that they are
kink-free. Unless specified otherwise, always fasten using cable ties. Position clamps so that other hos-
es cannot be damaged. When installing the hoses, the heater must be filled with coolant.
The connection should be "inline" based on the following diagram:
A
B
Ø 27
2
Non-designated spring clips
2 = Black (sw) rubber isolator
Ident. No.: 1315959G_EN
1
2
= 25 mm dia. 1 = Original vehicle spring clip
[2x].
Status: 31.01.2013
1
Hose rout-
ing dia-
gram
[2x].
© Webasto Thermo & Comfort SE 29