Final Work - Webasto Thermo Top Evo Installation Documentation

VW Passat

Final Work

WARNING!
Mount removed parts in reverse order. Check all hoses, clamps and all electrical connections for firm
seating. Insulate and tie back all loose lines.
Only use manufacturer-approved coolant. Spray the heater components with anti-corrosion wax (Tectyl
100K, Order No. 111329).
- Connect the battery
- Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
- Set digital timer, teach telestart transmitter
- Make settings on A/C control panel according to the "Operating Instructions for End Cus-
tomer".
- Place the "Switch off parking heater before refuelling" signboard near the filler neck.
- See installation instructions for initial start-up and function test
40
2
1317226C_EN
1
280
94
1 2
95
Printed in Germany
1 Underride protection
2 60mm dia. hole
Align exhaust end section 1 at centre of hole
and flush with underride protection 2 .
Feel the drive
Webasto AG
Postfach 80
D-82132 Stockdorf / Germany
National Hotline: 01805 93 22 78
(14 Cent aus dem deutschen Festnetz)
Hotfax: 0395 5592 353
Hotmail: technikcenter@webasto.com
http://www.webasto.com
05/2012
Cutting out
underride
protection
Aligning
exhaust
end sec-
tion
38
Printing: Steffen