K3G060 Relay P.c.b; K3I050 Lon/Synoptic P.c.b - Siemens FC700A Installation And Hardware Commissioning

10.4

K3G060 Relay p.c.b.

Pos. Module
1 Mounting plate
2 Programming connectors 'X1'.... 'X24':
Programming of external potential + or – to
relay contact
10.5

K3I050 LON/Synoptic p.c.b.

Pos. Module
1 Mounting plate
2 Programming switch 'S3': LON-Bus address Set according to the system documentation
3 Programming switch 'S4-1': Define LED
settings of the data bus devices
4 Resistor 'R1': line termination element
'LON-Bus'
Building Technologies
Fire Safety & Security Products
Preparation
Remove according to the system documenta-
tion, see description in document 007831
Set according to the system documentation, see
description in document 007831
1
X1
X24
Re-install card on mounting plate, connect data bus and peripheral equipment.
Preparation
Remove according to the system documenta-
tion, see description in document 007831
Set to 'ON' when the LED of the data bus de-
vices shall flash (only for devices with address
5... 8)
Stub line: if K3I050 is not the last device, re-
move resistor 'R1', see description in document
007831
1
S3
S4
R1
Re-install card on mounting plate, connect data bus and LON-Bus cable; supply
cable as well as the peripheral equipment.
Control terminal and floor repeater panels
2
2
3
4
Default
Mounted
'Open' (relay contact is potential-
free)
Default
Mounted
Address 0
To 'OFF'
Inserted 100Ω
007828_b_en_--
09.2008
23