FBII XL-20 Hookup And Installation Instructions page 49

XL-20 Hookup and Installation Instructions
3X2 or 4x2: Enter the desired first digit of the Alarm code in location L3 and the second
digit in L4 for the specific zone. Both digits will be used for all transmissions.
ADEMCO 4X2 EXPRESS: Enter the desired first digit of the Alarm code into the first
location and the second digit into the second location.
ADEMCO POINT ID (PID) Format: The digit entered in the first location will select
the PID Event code to be transmitted; refer to Appendix A for the PID Event Codes to be
selected.
The selections on the charts below are used to disable supervision for each zone.
For more information on CS Reporting Formats, refer to Appendix A at the back of this manual.
QUESTIONS 11 - 18 ZONES 1 - 8
There are 4 locations (L1-L4) within each of these questions that define the operation of the
zones. Enter a 2-digit number in locations L1 and L2 from the zone chart for the desired zone
type. Enter the desired Alarm code in locations L3 and L4 for this zone based on the dialer
format selected.
QUESTION 11
ZONE 1 TYPE & CS CODE
Question 11, L1 & L2 - Zone 1 Type
Question 11, L3 & L4 - CS Code for Zone 1
Zone 1 = Delay (Entry/Exit) w/CS Reporting code = 31
QUESTION 12
ZONE 2 TYPE & CS CODE
Question 12, L1 & L2 - Zone 2 Type
Question 12, L3 & L4 - CS Code for Zone 2
Zone 2 = Interior Follower w/CS Reporting code = 32
QUESTION 13
ZONE 3 TYPE & CS CODE
Question 13, L1 & L2 - Zone 3 Type
Question 13, L3 & L4 - CS Code for Zone 3
Zone 3 = Instant (Perimeter) w/CS Reporting code = 33
NOTE: If zones 1 - 3 are programmed as DELAY zones, they follow ENTRY DELAY
1. If zones 4 - 8 are programmed as DELAY zones, they follow ENTRY DELAY 2.
QUESTION 14
ZONE 4 TYPE & CS CODE
Question 14, L1 & L2 - Zone 4 Type
Question 14, L3 & L4 - CS Code for Zone 4
Zone 4 = Instant (Perimeter) w/CS Reporting code = 34
9–16
DEFAULT = 2031
Default = 20
Default = 31
DEFAULT = 4132
Default = 41
Default = 32
DEFAULT = 1033
Default = 10
Default = 33
DEFAULT = 1034
Default = 10
Default = 34