Cleaning And Installing Car Seat Pads - Maxi-Cosi MAGELLAN Manual

Cleaning and Installing Car Seat Pads

67
Cleaning Pads and Accessories
Machine wash separately with cold water on a gentle cycle. Make
sure harness covers are closed so fastening strips are not exposed.
Do not use bleach. Tumble dry separately for 10-12 minutes on low
heat. Remove immediately.
Cleaning Harness Strap
Spot clean using warm sudsy water and damp cloth.
WARNING:
Do not use child restraint without the seat
pad. Failure to do this can result in serious injury or death.
Installing Car Seat Pads
Seat Pad
Slip seat pad on to bottom of car seat.
Pull harness adjustment strap through pad.
Replace cupholders if they have been
removed.
Tuck seat pad along the sides and bottom
of the car seat.
On both sides of the seat, push pad tabs
into keyholes in shell and pull up to snap
tab into place.
Torso Pad
Wrap torso pad around the top of shell.
From the back of the seat, tuck torso pad
into the shell.
Tuck pad in along the sides of shell.
On both sides of the seat, push pad tabs
into keyholes in shell and pull up to snap
tab into place.
Headrest Pad
Adjust the headrest to the highest
position.
Starting from the top of the headrest,
gently pull headrest pad onto headrest.
Make sure headrest airbags stay in place.
Slide harness straps into slots in pad.
Attach all of the headrest pad fasteners
68
.