Cleaning Parts Of Car Seat & Installing Seat Pad Set - Maxi-Cosi Pria Sport Manual

Cleaning Parts of Car Seat and Installing
51
Seat Pad Set
Cleaning Pad and Accessories
Machine wash separately with cold water on a gentle cycle. Make
sure the harness covers are closed so the fastening strips are
not exposed. Do not use bleach. Tumble dry separately for 10-12
minutes on low heat. Remove immediately.
Cleaning Harness Strap
The harness straps on this car seat are not
replaceable. Do not fully remove the harness
straps from the shell.
Check the harness straps often for any wear or damage.
Spot clean using warm sudsy water and damp cloth.
Spilled food and liquids on the car seat may result in mold or
bacterial growth over time. These spills could also attract insects or
rodents.
Cleaning Buckle & Car Seat Shell
Spot clean using warm sudsy water and damp cloth. Do not sub-
merge into water.
Do not use the child restraint without the seat pad or
with damaged harness straps.
1
Slip Seat Pad Over and
Behind Headrest
Lay the pad in car seat and slip it
over and behind the headrest.
Gently slide the harness holders
through slots in pad. Pull the buckle
through the slot in the pad.
2
Pull Harness Adjustment
Strap Through Slot in Pad
3
Pull Pad Over Outside Edges of
Shell
4
Attach Fasteners on Seat Pad
5
Adjust Headrest to Highest
Position
6
Starting At Bottom of Headrest,
Pull Headrest Pad onto
Headrest
Then pull the headrest pad up gently
over the airbags and around the top
of the headrest.
7
Attach Fasteners on Headrest
Pad
52