Tether Use - Maxi-Cosi MAGELLAN Manual

Convertible car seat
Hide thumbs Also See for MAGELLAN:
Table of Contents

Advertisement

Tether Use

23
For Forward-Facing Mode Only
Tether Anchors
Your vehicle's features may be considerably different
than those pictured here.
You must always attach, adjust, and secure the top anchorage
(tether) strap when installing the child restraint forward-facing
with internal harness. Tethers improve the installation and stability
of child restraints and reduce the risk of injury.
Attach the tether hook to the tether anchor designated by your
vehicle manufacturer for that seating position. Check your vehicle
owner's manual for more information.
If the seating position does not have a tether anchor, use a different
seating position or see your dealer or a qualified mechanic and
have one installed.
WARNINGS
Using this child restraint without the tether strap anchored as
recommended by the manufacturer would be a misuse of the
child restraint and, in a sudden stop or crash, could result in
serious injury or death.
Do not fasten multiple tether hooks on the same tether anchor
in the vehicle.
Storing Tether Strap
When installing rear-facing,
using the booster seat mode,
Strap
or when the car seat is not
installed in a vehicle, attach
Adjuster
the tether hook to its storage
Hook
Storage
attachment on back of car seat
Location
as shown.
Gently tighten to remove slack.
Tether Storage
and Parts
Adjusting Tether Strap
Pull free end of
belt to tighten
To tighten: After the child
restraint is locked into place
with the lower anchor/UAS belt
or vehicle belt, push down on
child restraint and gently pull
on free end of tether strap.
To loosen: Lift up on tether
Lift adjuster up
adjuster and push it towards
to loosen
tether hook.
24

Advertisement

Table of Contents
loading

Table of Contents