Table of Contents
Advertisement
29
6
7
8
Buckle the Vehicle Belt
Tighten Belt
Place hand in child restraint.
Firmly push child restraint
down and towards the vehicle
seat back while pulling the
shoulder belt or the free end
of the lap belt parallel with
the belt path through the belt
path opening as shown.
Go to the Side of the
Car Seat That Does Not
Have the Vehicle Buckle
No Vehicle Buckle
9
10
If it moves more than 2.5 cm (1 in.), you can try:
A. Reinstalling the child restraint.
B. Changing to a different seating location.
C. Switching to lower anchor/UAS belt installation if lower/UAS
anchors are available in your vehicle.
30
Locate AutoLock
Slide only the shoulder
portion of the belt up through
the AutoLock as shown.
Pull it up until you cannot pull
it any farther.
Shoulder Belt
Fully threaded into
AutoLock as shown.
Lap Belt
Lays below the bottom
notch as shown.
Check Belt Tightness
Hold child restraint at the belt
path with your weaker hand.
Push and pull from side to
side.
It should not move more than
2.5 cm (1 in.).
continued on next page
Hide quick links:
Advertisement
Table of Contents
