Cleaning Parts Of Car Seat And Installing Seat Pad Set - Maxi-Cosi MAGELLAN XP MAX Manual

65
5
Remove Seat Pad from Seat
Removing Torso Pad
Undo Torso Pad Tabs
1
On the sides of the car seat, there are
tabs that keep the torso pad in place.
Place your thumb over the tab and pull it
down to release it from the keyhole in the
car seat.
Repeat for other side.
From Back of Seat, Remove the
2
Torso Pad Flap That is Tucked
into the Shell
Remove Torso Pad from Car Seat
3
Removing Headrest Pad
Undo Fasteners on Headrest Pad
1
Gently pull the headrest pad off of the
headrest. Make sure headrest airbags
stay in place.
Cleaning Parts of Car Seat and
Wash and Care of Car Seat Parts
Installing Seat Pad Set
Cleaning Seat Pad Set, Harness Covers, Buckle Cover,
Head & Back Pillows, Infant Positioning Pillow
Machine wash separately with cold water on a gentle cycle. Make sure
harness covers are closed so fastening strips are not exposed. Do not use
bleach. Tumble dry separately for 10-12 minutes on low heat. Remove im-
mediately.
Cleaning Harness Strap
Check the harness straps often for any wear or damage. Spot clean
using warm sudsy water and damp cloth. Spilled food and liquids on the car
seat may result in mold or bacterial growth over time. These spills could also
attract insects or rodents.
Cleaning Buckle and Shell
Spot clean using warm sudsy water and damp cloth.
Do not submerge into water.
Do not use the child restraint without the seat pad or with
damaged harness straps.
Installing Car Seat Pad Set
Seat Pad
Slip seat pad on to bottom of car seat.
Pull harness adjustment strap through pad.
Tuck seat pad along the sides and bottom of
the car seat.
On both sides of the seat, push pad tabs into
keyholes in shell and pull up to snap tab into
place.
Place seat pad panel in seat. Pull the buckle
through pad. Zip seat pad panel.
66
66
continued on next page