Exposure Control - Planet Networking & Communication ICA-M4320P User Manual

3.6.2 Exposure Control

Power Frequency Frequency of power line: 50 or 60Hz.
Auto: It will adjust the image sensor exposure automatically as
possible.
Exposure Control Hold: The current exposure value will be fixed.
Manual Exposure: User can configure sensor exposure to fixed
setting.
Set the Maximum Exposure Time. However, the real exposure time
Maximum
Exposure Time may be shorter if it is under good light condition.
Exposure value is AE target value. This value is to adjust the
Exposure Value integration, analog gain and digital gain to achieve the target
brightness value (Exposure Value).
Iris Enable or disable built-in P-Iris control.
BLC Enable or disable BLC (back light compensation) function.
Digital WDR: It is effective at the complex in strong backlight and
light, clear images without distortion. The recommended application is
garage, where the junction of light and dark is.
WDR
True WDR: Much effective than D-WDR, true WDR is great for
tunnels where license plates, etc. can be recognized.
H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom
62
ICA-M4320P