Power Cord Retainer Mechanism - Cisco Catalyst 9404R Switch Hardware Installation Manual

Power Cord Retainer Mechanism

Figure 28: Installing a Power Supply Blank Cover
Figure 29: Power Supply Blank Cover Installed
Note Power supply blank covers can be placed in any slot when fewer than 8 power supplies are installed in a
chassis.
Power Cord Retainer Mechanism
This section shows how to correctly operate the power cord retainer, to tighten or loosen it while installing
or removing the power supply module.
Note Some of the illustrations do not include the power supply module, for the sake of clarity. The retainer is
otherwise permanently fixed to the power supply module.
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
98
Removing and Replacing FRUs