Cisco Catalyst 9404R Switch Hardware Installation Manual page 152

Configuring Your Device Based on a Site Profile
Setting
VLAN
Management Interface
QoS Policy
Uplink Interfaces
Downlink Interfaces
Port-channel
Figure 69: Site Profile - Distribution Switches
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
146
Single Distribution Single Distribution
Switch (Single Downlink) Switch (Single Port
Channel Downlink)
The following VLANs are The following VLANs are
created: created:
• Default VLAN
• Data VLAN
• Voice VLAN
• Management VLAN
Layer 3 settings Layer 3 settings
configured on the configured on the
management port, based management port, based
on Quick Setup on Quick Setup
QoS Policy for QoS Policy for
Distribution defined Distribution defined
Selected uplink ports Selected uplink ports
connect to other connect to other
distribution or core distribution or core
switches switches
Downlink connections to Downlink connections to
access switches access switches
configured in Trunk mode configured in Trunk mode
Port-channel to core Port-channel to core or
created access created
Initial Configuration for the Switch
Redundant Distribution
Switch (Port Channel
Peer and Downlink)
The following VLANs are
created:
• Default VLAN • Default VLAN
• Data VLAN • Data VLAN
• Voice VLAN • Voice VLAN
• Management VLAN • Management VLAN
Layer 3 settings
configured on the
management port, based
on Quick Setup
QoS Policy for
Distribution defined
Selected uplink ports
connect to other
distribution or core
switches
Downlink connections to
access switches
configured in Trunk mode
Port-channel to core or
distribution created