Chassis And Module Power And Heat Values - Cisco Catalyst 9404R Switch Hardware Installation Manual

Chassis and Module Power and Heat Values

Locale Part Number
UPS 220V CAB-C19-CBN
Chassis and Module Power and Heat Values
The following tables provide the power and heat dissipation data. Unless otherwise noted, the information in
the tables is measured under fully loaded conditions (transceivers installed).
Note
DC output power is the output from the power supply (internal to the system). The AC-input power is the
input from the outlet to the power supply. The percentage difference between the two values is the efficiency
of the power supply.
Table 18: Power Requirements and Heat Dissapation - Fan Tray
PID
C9404-FAN
C9407-FAN
C9410-FAN
Table 19: Power Requirements and Heat Dissapation - Supervisor Module
PID
C9400-SUP-1
C9400-SUP-1XL
C9400-SUP-1XL-Y
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
130
Cordset Rating
20 A, 250 VAC
AC-Input DC-Output in
Power in Watts
Watts
(Power
(Power Requested)
Allocated)
600 540
600 540
778 700
AC-Input DC-Output in
Power in Watts
Watts
(Power
(Power Requested)
Allocated)
444 400
444 400
444 400
AC Source Plug Type
Figure 63: 130923
Current @ Current @ Current @
90V 120V 180V
6.67 5.00 3.33
6.67 5.00 3.33
8.64 6.48 4.32
Current @ Current @
90V 120V
4.94 3.70
4.94 3.70
5.0 3.76
Specifications
Current @ 240V Heat Diss.
in BTU /
hr.
2.50 2047
2.50 2047
3.24 2654
Current @ Current @ Heat Diss. in
180V 240V BTU / hr.
2.47 1.85 1516
2.47 1.85 1516
2.51 1.88 1540