Installing a Compact Switch
Figure 41: Securing the Power Adapter to the Adapter Bracket
1
Installing the Power Cord Retainer (Optional)
Note
Before you begin
• The power cord retainer (C9K-CMPCT-PWR-CLP) is optional. You can order it when you order your
Procedure
Step 1
Fix the power cord retainer strap to the switch using the M3 pan-head screw provided.
Power adapter
This section applies to switches with an AC power connector.
switch, or you can order it later from your Cisco representative.
2
Velcro strap
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
Installing the Power Cord Retainer (Optional)
69