Power Supply Specifications; 3200 W Ac-Input Power Supply Specifications - Cisco Catalyst 9404R Switch Hardware Installation Manual

Power Supply Specifications

Item
Random
(Nonoperating
Storage)
10
11
Power Supply Specifications

3200 W AC-Input Power Supply Specifications

The following table lists specifications for the 3200 W AC input power supply:
Table 14: 3200 W AC-Input Power Supply Specifications
Specification
AC-input type
AC-input voltage
AC-input current
AC-input frequency
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
122
Specification
Vibration Spectral Break Point
and
Frequencies
2.5 – 5 Hz
5 – 100 Hz
100 – 200 Hz
Minimum ambient temperature for cold startup is 0ºC
Short-term exceptional conditions are for no longer than a one-year period of—96 consecutive hours,
or 360 hours total, or 15 occurrences.
Description
Wide-ranging input with power factor correction.
Note
Low-line (115 VAC nominal)—85 VAC (min) to 132 VAC (max)
High-line (230 VAC nominal)—180 VAC (min) to 264 VAC (max)
17.6 A at 100 VAC (1570 W output)
17.6 A at 200 VAC (3200 W output)
50/60Hz nominal (47 to 63Hz full range)
Acceleration
Density
-
1.0 [(m/s²)²]/Hz*
(0.01 g²/Hz)
-
Power factor correction is a standard feature on AC-input power supplies.
Power factor correction reduces the reactive component in the source
AC current, allowing higher power factors (0.90 minimum at loads equal
to or greater than 20 percent of maximum loads, and 0.95 minimum at
3200W maximum loads, at 115/230 VAC nominal AC input voltages)
and lower harmonic current components.
Specifications
Spectral Slope
6 db /octave
-
24 db /octave