Separating Knife Adjustment - Roland CAMM-1 PRO CM-500 Service Notes

4 Adjustment

4-11 SEPARATING KNIFE ADJUSTMENT

Move the TOOL CARRIAGE fully to the right end.
1
Turn power on and press the [SETUP] key within 1 second.
4
Press [SETUP] key while pressing [
2
to enter the SERVICE MODE.
And select "Knife" with [
[ENTER] key.
Enter the KNIFE TEST MODE by pressing the [TEST] key.
3
Press [ENTER] key to carry out the KNIFE TEST.
4
TOOL CARRIAGE will move to the left and SEPARATING
KNIFE becomes DOWN.
48
], [ ] and [ ] keys
] and [ ] keys and press the
[ENTER]
key
select "knock"
[ENTER] key
[TEST]
key