Roland CAMM-1 PRO CM-500 Service Notes page 51

In case of pen bouncing problem, increase the "ATK" and
7
decrease the "BRK" with [
the [ENTER] key for save settings.
In case the timing of the landing is delayed, decreased the
8
"ATK" and decrease the "BRK" with [
Then, press the [ENTER] key to save settings.
Try LANDING CUT TEST again and check the result.
9
In case of problem, re-set "ATK" and "BRK".
] and [ ] keys. Then, press
] and [ ] keys.
4 Adjustment
4
47