Pinch Roller_Fixing; Cutter Protection_Fixing - Roland CAMM-1 PRO CM-500 Service Notes

3-3 PINCH ROLLER_FIXING

TAPERED TYPE is used for left and right PINCH ROLLERs
1
and FLAT TYPE is used for the middle one.
Red marking is put on the outside surface of left and
right PINCH ROLLERs to show the direction.

3-4 CUTTER PROTECTION_FIXING

Put the CUTTER PROTECTION by leaving the equal space
1
at both ends of the BED.
Make sure that the CUTTER PROTECTION is not bumpy by
2
pushing it with your finger.
3 Replacement of Main Parts
Red Marking
CUTTER
PROTECTION
3
23