Carriage Wire_Removing - Roland CAMM-1 PRO CM-500 Service Notes

3 Replacement of Main Parts

3-2 CARRIAGE WIRE_REMOVING

Remove the GUIDE RAIL COVER, LEFT & RIGHT SIDE
1
COVER and TOOL CARRIAGE.
3
Loosen SCREW A and SCREW B in order to loosen the
2
CARRIAGE WIRE TENSION.
Remove the CARRIAGE WIRE from the DRIVE PULLEY.
3
Remove the CARRIAGE MOTOR.
4
20
SCREW B
CARRIAGE WIRE
SCREW A
CARRIAGE MOTOR