Roland CAMM-1 PRO CM-500 Service Notes page 3

Turn off the primary power SW
before servicing.
About the Labels Affixed to the Unit
These labels are affixed to the body of this product.
The following figure describes the location.
The wiring terminal intended for connection
of the protective earthing conductor
associated with the supply wiring.
Do not disconnect the cable of this terminal
except the time of replacement.
In addition to the
: Tips and advice before the adjustment.
: Indicates tightening torque.
8
kgf•cm
Torque
and symbols, the symbols shown below are also used.
Electric charge.
Do not touch when power is on.
80
: Indicates amount for Pen Pressure and Tension.
100
gf
: Indicates clearance.
2.4
2.6
mm
About the Labels Affixed to the Unit