Removing The Hard Disk Drive - Clevo PB70RC-G Service Manual

Removing the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 7mm
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Disassembly Process
1. Turn off the computer, turn it over and remove the battery
2. Remove the screw (Figure
1
3. Remove the SD card cover
4. Carefully lift the bottom case
a.
1
b.
4
3
5
13
14
15
12
11
2
(page 2 -
3a).
and screws - (Figure 3b).
6 2 3 17
up in the direction of the arrow at point
18
c.
6
7
8
16
17
9
10
5) and keyboard (page 2 -
- and remove it
19 24
24
18
23
22
21
Disassembly
Figure 3
HDD Assembly
Removal
a. Remove the screws.
b. Remove the SD cover
and screws.
5). c. Remove the
case.
(Figure 3c ) .

HDD System Warning
New HDD's are blank. Be-
fore you begin make sure:
You have backed up any
19
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to install
your operating system and
20
programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the operat-
ing system you plan to in-
stall. Copy these
removable medium.

2. SD Card Cover
18. Bottom Case
• 15e Screws
Removing the Hard Disk Drive 2 - 7
bottom
to a