Removing The M.2 Ssd Module - Clevo PB70RC-G Service Manual

Disassembly

Removing the M.2 SSD Module

Figure 6
M.2 SSD-1 Module
M.2 SSD-1 Removal Procedure
Removal
1. Turn off the computer, remove the battery
2. The M.2 SSD module will be visible at point
a. Locate the M.2 SSD.
3. Remove the screw
b. Remove the screw.
c. The M.2 SSD module
4. The M.2 SSD module
will pop up.
5. Reverse the process to install a new module (do not forget to replace the screws and thermal pad).
a.
b.

3.M2 SSD Module
• 1 Screw
2 - 10 Removing the M.2 SSD Module
(Figure 6b).
2
(Figure 6c) will pop-up, and you can remove it from the computer.
3
1
1
2
2
(page 2 - 5), keyboard (page 2 -
on the mainboard (Figure 6a).
1
c.
3
6) and bottom case (page 2 - 7).
3
3