Advertisement
2. Attach an Upright Base (2) to one of the
Stabilizers (1) with the indicated two M8 x 68mm
Carriage Bolts (20) and two M8 Locknuts (22).
Note: Attach the Upright Base so that the
hexagonal holes are on the indicated side. Do
not tighten the Locknuts yet.
Attach the other Upright Base (not shown) to
the other Stabilizer (not shown) in the same
way.
3. Orient the Bottom Crossbar (10) so that the warn-
ing decal is on top. Attach the Bottom Crossbar to
one of the Upright Bases (2) with two M8 x 77mm
Bolts (28), a Support Plate (13), and two M8
Locknuts (22). Do not tighten the Locknuts yet.
Attach the Bottom Crossbar (10) to the other
Upright Base (2) in the same way.
2
1
3
10
Decal
2
28
7
Hexagonal
holes on
this side
2
22
22
20
13
22
2
Advertisement
