Advertisement
9. Orient the Backrest (8) so that the name "WEI-
DER" is at the top and the number "200" is at the
bottom. Attach the Backrest to the Top Crossbar
(7) with four M6 x 16mm Screws (27) and four
M6 Washers (21).
10. Attach an Arm Pad (6) to one of the Dip Arms (5)
with two M6 x 73mm Screws (18).
Repeat this step with the other Arm Pad (6).
11. Make sure that all parts have been properly tightened before the exercise rack is used. Note: Some
hardware may be left over after assembly is completed.
9
7
"WEIDER"
8
"200"
10
6
5
18
10
27
21
27
21
6
Advertisement
