Electrical Installation, Control Terminals - GE AF-650 GP Operating Instructions Manual

Installation
3.4.16 Electrical Installation, Control
Terminals
To connect the cable to the terminal:
1. Strip insulation by about 9-10mm
3 3
2.
Insert a screwdriver
3. Insert the cable in the adjacent circular hole.
4. Remove the screwdriver. The cable is now
mounted in the terminal.
To remove the cable from the terminal:
1.
Insert a screw driver
2. Pull out the cable.
1)
Max. 0.4 x 2.5mm
46
AF-650 GP High Power Operating Instructions
1)
in the square hole.
1)
in the square hole.