Osd Navigation - Fujitsu KVM0108A User Manual

OSD Main Screen "Administrator" mode
Note: 1. The User Main Screen does not show the F4 and F6 functions, since these are
reserved for the administrator and cannot be accessed by standard users.
2. Only ports that the Administrator has set to "accessible" are visible on the User Main
Screen. See "Set Accessible Ports" on page 20.

OSD Navigation

• To close the OSD, press "X" (Close) at the upper right corner of the OSD Window or press [
• To Logout, press F8 or click the "ZZ Z " symbol at the top of the Main Screen.
• To see the ports for a particular station, press the plus sign [+] in front of the station number. The
port number list opens. To close the list, press the circle minus sign [-] in front of the station
number.
• To move up or down through the list one line at a time, press the up and down triangle symbols
or use the up and down arrow keys. If there are more list entries than room on the Main Screen,
the list will scroll.
• To move up or down the list one screen at a time, press the up and down arrow symbols or use the
[ ] and [
P U
AGE P
screen will scroll.
• To focus on a port, double-click it, or move the highlight bar to it and then press [
] keys. If there are more list entries than room on the Main Screen, the
P D
AGE OWN
].
E
SC
].
E
NTER
15