Installation; Overview; Rack Mounting - Fujitsu KVM0108A User Manual

Installation

Overview

KVM adapter cables connect the KVM switch to the connected devices. A separate KVM adapter cable
is required for each computer or device connection.
See "KVM Server Modules and cables" on page 4.
Note: 1. See "Safety" on page 2 before installing the KVM switch.
2. Power to any device must be turned off before connecting. Unplug the power cords of any
computers that have the Keyboard Power On function.

Rack Mounting

Note: Allow at least 2 inches (5.1 cm) on each side for adequate ventilation and 5 inches
(12.7 cm) at the rear for power cord and cable clearance.
The switch can be mounted in a 19" (1U) rack. The mounting brackets can screw into the front or the
back of the unit so that it can be attached to the front or back of the rack.
Rack mounting
1. Position the KVM switch in the front of
the rack. Align the mounting bracket holes
with the holes in the rack.
2. Secure the mounting brackets to the rack
with the screws.
7