Skip Mode Switching
Switch between servers to manually monitor them. Focus on a particular port for as long as you like,
as opposed to auto-scanning, which automatically switches the port focus after a fixed interval.
See "F5: SKIP" on page 21 for more information.
Entering skip mode
To enter Skip mode, enter the following Hotkey combination:
1. Invoke Hotkey mode: [
2. You press the arrow keys, Hotkey mode is automatically exited and Skip mode entered. Switch
ports as follows:
– Left arrow to skip to the previous accessible port
– Right arrow to skip to the next accessible port
– Up arrow to skip to the last accessible port of the each hierarchy station
– Down arrow to skip to the first accessible port of the each hierarchy station
3. Once in Skip mode, continue skipping by pressing the arrow keys. The [
combination does not have to be used again.
4. While Skip mode is engaged, ordinary keyboard and mouse functions are suspended. Only Skip
mode compliant keystrokes can be input. Exit Skip mode to regain normal control of the console.
Exiting skip mode
To exit Skip mode, press [
Setting the Hotkey Beeper ON/OFF
Turn the beeper (see "Activate Beeper" on page 19) on and off with Hotkeys:
1. Invoke Hotkey mode: [
2. Press
to turn the beeper on or off. The command line displays "Beeper On" or "Beeper Off"
[B]
for one second; then the message disappears Hotkey mode is automatically exited.
] + [-] or [
N
L
UM
OCK
] or [
].
E
S
SC
PACEBAR
] + [-] or [
N
L
UM
OCK
] + [
].
C
F12
TRL
] + [
].
C
F12
TRL
] + [-]
N
L
UM
OCK
25