Rack Mounting - Rear
1. Remove the brackets from the front of the
KVM switch.
2. Install the smaller bracket from the front of
the KVM switch to the back. Install the rack
mounting bracket from the inventory to the
other side of the rear of the KVM switch.
3. Slide the KVM switch into the rack. Align
the mounting bracket holes with the holes in
the rack.
4. Secure the mounting brackets to the rear of
the rack.
Optional KVM switch to Rack Console Mounting - Rear
The KVM switch can be mounted to a Rack Console (not included). See the installation sheet for the
Rack Console KVM switch bracket kit for more information.
8