Fujitsu KVM0108A User Manual page 26

To change a setting:
1. Double-click or move the highlight bar to the setting, then press [
2. After you select an item, a submenu with further choices opens. To make a selection, double-
click it or move the highlight bar to it, then press [
choice.
Setting
OSD Hotkey
Port ID Display
Position
Port ID Display
Duration
Port ID Display
Mode
Scan Duration
Scan/Skip Mode
Screenblanker
Hotkey Command
Mode
Hotkey
Set OSD Language Sets the language for the OSD display. The default is English.
Set Console
Keyboard
Set Logout
Timeout
18
Selects which hotkey activates the OSD function: [
or [ ] [ ].
A A
LT LT
Since the [ l] or [ ] key combinations may conflict with programs running on the server, the
C A
TR LT
default is the [
S L
CROLL OCK
Location of the port ID on the monitor. The default is the upper left corner. To change the
location: Use the mouse or the arrow keys plus
numeric keypad with
N L
UM
the position and return to the Set submenu.
Determines how long a port ID displays on the monitor after a port change has taken place. There
are two choices: 3 seconds and Off.
Selects how the port ID is displayed: the port number alone (PORT NUMBER), the port name alone
(PORT NAME), or the port number plus the port name (PORT NUMBER + PORT NAME).
The default is PORT NUMBER + PORT NAME.
Determines how long the focus dwells on each port as it cycles through the selected ports in Auto
Scan mode. Enter a value from 1-255 seconds, then press [
The default is 5 seconds. A setting of 0 (zero) disables the Scan function.
Selects which server will be accessed under Skip mode, and Auto Scan mode. Choices are:
• ALL - All the ports which have been set Accessible
• QUICK VIEW - Only those ports which have been set Accessible and selected as Quick View
Ports
• POWERED ON - Only ports which have been set Accessible and are Powered On;
• QUICK VIEW + POWERED ON - Only those ports which have been set Accessible, selected as
Quick View Ports, are Powered On.
The default is ALL.
If there is no input from the console for the amount of time set with this function, the screen
becomes blank. Enter a value from 1-30 minutes, then press [
the function. The default is OFF.
Enables / Disables the Hotkey function (see "Hotkey Operation" on page 23), in case a conflict with
programs running on the computers occurs. The default is ON.
Selects the Hotkey invocation keys (see"Hotkey Operation" on page 23). Choices are
.
+ [-], [CTRL] + [F12]
OR
The default is
[NUM LOCK] + [-]
Sets the keyboard language mapping of the console keyboard. The default is Auto.
If there is no input from the console for the amount of time set with this function, the operator is
automatically logged out. A login is necessary before the console can be used again. This enables
other operators to gain access to the server when the original operator is no longer accessing
them, but has forgotten to log out. To set the timeout value, enter a number from 1-180 minutes,
then press [ ]. If the number is 0 (zero), this function is disabled. Default is Off.
E
NTER
Note: This feature does not function if Set Login Mode is disabled (see page 20).
]. An icon appears before the selected
E
NTER
Function
S
CROLL
] combination.
P U
AGE P
off), to position the port ID display, then press [
OCK
.
].
E
NTER
] [ ]; [
L S L
OCK CROLL OCK
, , , , and 5 (on the
P D H E
AGE OWN OME ND
E
NTER
].
E
NTER
]. A setting of 0 (zero) disables
E
NTER
] [ ]
C C
TRL TRL
] to lock
[NUM LOCK]