Installation
Overview
KVM Adapter Cables connect the KVM switch to the connected devices. A separate KVM Adapter
Cable is required for each server or device connection. See the list of KVM Adapter Cables on page 5.
NOTE:
1. Refer to the Safety section of this manual before installing the KVM switch.
2. Power to any device that will be connected to the installation must be turned off. Unplug the
power cords of any computers that have the Keyboard Power On function.
Rack Mounting
The KVM switch can be mounted in a 19" (1U) rack. The mounting brackets can screw into either the
front or the back of the unit so that it can attach to the front or the back of the rack.
NOTE:
Use cage nuts (not provided) for racks that are not pre-threaded.
Rack Mounting - Front
1. Position the KVM switch in the front of the
rack. Align the mounting bracket holes
with the holes in the rack.
2. Secure the mounting brackets to the rack.
9