PureTools PT-PSW-41RS User Manual page 25

User Manual
PT-PSW-41RS
Command Function
50778% Check the EDID
50793% Check the HDCP status
Check
50707%
resolution and polarity.
50699% Check the firmware version
Wake up or let this device go into
50697%
standby mode.
50698% Software updating
Restore the factory default
50617%
settings
Notice:
When HDCP is set to active, whether output source is with HDCP depends on input

source. If the input source is with HDCP, so is the output and vice versa.
Screen output adjusting avails only when the screen output adjusting is on. Send

command 50678% to turn on.
Inquire Commands
the current
System Commands
Feedback Example
EDID: xx (xx=1080P&PCM 2ch/
1080P&5.1ch/
4K&PCM 2ch)
HDCP Off/ HDCP On/ HDCP Active
1920x1080
output
Hpolarity:1/0
Vpolarity:0/1
Version Vx.x.x (x=0~9)
STANDBY. /PWON.
20
1080P3d&5.1ch/