PureTools PT-PSW-41RS User Manual page 23

User Manual
PT-PSW-41RS
Command Function
502xx% Set the brightness to xx.
503xx% Set the contrast to xx.
504xx% Set the saturation to xx.
505xx% Set the sharpness to xx.
Auto-adjust the input parameter
50606%
for VGA signal
50607% Adjust the color temperature
50608% Set the aspect ratio
50614% Set the picture mode
Command Function
50678% Enable screen output adjusting
50679% Disable screen output adjusting
50670% Move the image to left
50671% Move the image to right
50672% Move the image up
50673% Move the image down
Stretch left from left side
50674%
(increase image width)
Image Setup Commands
Image adjustment Commands
18
Feedback Example
Brightness: xx (xx=00~99)
Contrast: xx (xx=00~99)
Saturation: xx (xx=00~99)
Sharpness: xx (xx=00~99)
VGA Input Auto
Color Temperature: xx
(xx= Cool/ Medium/ Warm/ User.)
Aspect Ratio: xx (xx= 16:9/ 4:3/
auto
Picture Mode: xx (xx= dynamic/
standard/ mild/ user)
Feedback Example
Enter Output Position Adjust
Exit Output Position Adjust
Output Position Adjust X xx
Output Position Adjust X xx
Output Position Adjust Y XX
Output Position Adjust Y xx
Output Width Adjust xx