Siemens SIMOTION D425 Manual page 35

LED
DP2
OPT
Note
While the SIMOTION D4x5 is ramping up, all LEDs are briefly illuminated in yellow.
Additional information
You can carry out a detailed diagnosis using a PG/PC and the Engineering System.
Information on the diagnosis via LED displays can also be found in the Commissioning and
Hardware Installation Manual
link under menu instructions.
D4x5
Manual, 05/2009
Meaning
... indicates the state of the PROFIBUS DP2/MPI interface.
... indicates the state of the option module (if available).
SIMOTION D4x5
Operator control (hardware)
and in the Online Help of this chapter via the
2.3 LED displays
35