Wire The Modules - Allen-Bradley C Series Nstallation Instructions

POINT I/O Synchronous Serial Interface Absolute Encoder Module

Wire the Modules

To wire the modules, refer to the diagrams and tables.
POINT I/O Synchronous Serial Interface Absolute Encoder Module
D = Data
I1 = Digital Sourcing Input 1
C = Clock
V = SSI Sensor
WARNING: If you connect or disconnect wiring while the field-side power is
on, an electrical arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
Module
Module status
Status
Network
Network status
Status
NODE:
Run status
Up status
Down status
Comp status
I1
1734
D+
V+
Shield
C+
Publication 1734-IN581E-EN-E - October 2015
RUN
UP
DOWN
COMP
SSI
D-
V-
I1
C-
43123
11