Introduction - Siemens SIMOTICS-T 1FW68 Engineering Manual

Introduction

Scope of the documentation
This documentation only describes the functionality of a reference motor. The range of
component combinations of segment motors is too extensive to take into account all of the
detailed information in this documentation. When requested, the local Siemens office can
provide machine builders detailed information about customized segment motors.
The machine builder documents any modifications or changes to the motor made by him.
Functions not described in this documentation are possible in the drive system. However, no
claim can be made regarding the availability of these functions when the equipment is first
supplied or in the event of service.
This documentation should be kept in a location where it can be easily accessed and made
available to the personnel responsible.
Target group
This manual is aimed at planning, project, and design engineers as well as electricians,
fitters, and service personnel.
Benefits
This configuration manual enables the target group to comply with the rules and guidelines
that apply when segment motors are engineered. It helps you select products and functions.
Text features
In addition to the notes that you must observe for your own personal safety as well as to
avoid material damage, in this document you will find the following text features:
Operating instructions
Operating instructions with the specified sequence are designated using the following
symbols:
The arrow indicates the start of the operating instructions.
The individual handling steps are numbered.
1. Execute the operating instructions in the specified sequence.
The square indicates the end of the operating instruction.
Operating instructions without a specified sequence are identified using a bullet point:
● Execute the operating instructions.
1FW68 radial segment motors
Configuration Manual, 04/2017, 6SN1197-0AE02-0BP1
5