Table of Contents
Advertisement
Table 8- 3
Examples of suitable control systems for the SINAMICS S120 drive system
Open-loop control system
SINAMICS
SINUMERIK 840D sl
SIMOTION
The integration of one stator segment in a system is shown in the following diagram:
● Connecting Temp-S and Temp-F via TM120
● Optional encoder connection:
– Incremental encoder (sin/cos 1 V
– Absolute encoder (EnDat with 1 V
– DRIVE-CLiQ absolute encoder via TM120
● Connecting (power) the stator segment to a Motor Module
Note
Cables for power connection
The connecting cables required for the power connection depend on the current demand of
the stator segment being used. Ordering examples for cables are provided in Chapter "Order
designation".
1FW68 radial segment motors
Configuration Manual, 04/2017, 6SN1197-0AE02-0BP1
with1 V
) as angle measuring system via SMC20
PP
Control Unit
CU320-2
NC7x0.3 (basic and type 1B) NX1x.3
D4x0 /CX32
) as angle measuring system via SMC20 or
PP
, order designation EnDat01 or EnDat02 - or SSI
PP
Electrical connection
8.3 System integration
137
Advertisement
Table of Contents
