Bosch Rexroth IndraControl VDP 80.1 Series Manual page 31

DOK-SUPPL*-VDP*80.1***-PR03-EN-P
Rexroth IndraControl VDP 80.1 Machine Operator Panel Operator Display
The HMI operator panels of the VDP 80 series are approved in compliance with
the following standard:
● UL508 (industrial control systems)
In combinations or extensions, approvals can be limited or missing. That is why
the approval has to be checked at the device by means of the UL marking.
To ensure an operation according to the UL standard, the following require‐
ments have to be met:
● Only insulated copper wire 75 °C / 167 °F has to be used.
The UL mark only applies to the device in delivery status (ex works). The com‐
pliance with UL requirements has to be checked after changes have been made
to the device, e.g. after additional extension cards have been plugged in.
Bosch Rexroth AG
Dimensions, Installation and Wiring
29/61