Advertisement
Possible cause
The wrong emulation is
selected.
The wrong character table,
code page or international
character set is selected.
Static electricity caused by
interference from nearby
electrical devices or by a
low level of humidity is
affecting the printer's
operation.
Inappropriate settings have
been selected from your
application program.
Action
Check the emulation
selection (see Selecting
which emulation to use on
page 46 of Chapter 4), and
change it if necessary.
Check Electronic DIP
Switch settings D2, D3, D4
and D5 (see Making
Electronic DIP Switch
settings on page 37 of
Chapter 4).
Make sure that the printer
is not too close to any
devices with electric motors
or raise the humidity level.
Choose different settings in
your application.
There are wires missing
from the print head.
Return the printer to your
dealer for repair.
Page100
Advertisement
