Advertisement
I
Reverseline feed
MODE
ASCII
Decimal
Hexadecimal
Std.
<ESC> <LF>
27 10
IB OA
IBM
<E SC> " ] "
27 93
IB
5D
Prints the current line and moves the paper in the
reverse direction to the preceding line. Ignored when the
printer is in friction feed mode.
The line spacing is set by one of the commands listed
previously.
Select forward feed mode
MODE
ASCII
Decimal
Hexadecimal
Std.
<FS> "F"
28 70
IC 46
Cancels the reverse feed mode and selects forward feed
mode. This is the default setting at power-on.
Select reverse feed mode
MODE
ASCII
Decimal
Hexadecimal
Std.
<FS> "R"
28 82
IC 52
Selects reverse feed mode. Reverses the direction of all
verticalmovements. Ignored when friction feed is used.
Perform one-time line feed
MODE
ASCII
Decimal
Hexadecimal
Both
<E SC> "J"
n
27 74
n
IB 4A n
Feeds the paper once by n times the defined base unit
(n/180 inches in Standard mode). The value of n is
between O and 255. If n = O, the line-feed distance is set
to O. Does not move the print position right or left. Does
not change the line-spacing setting.
Page126
Advertisement
