Star Micronics NX-2450 User Manual page 136

Perform one n/180-inch reverse line feed
MODE ASCII Decimal Hexadecimal
Std.
<ESC> " j " n 27 106 n IB 6A n
Feeds the paper once by n/180 inches in the reverse
direction, where n is between O and 255. If n = O, the
line-feed distance is set to O. Does not move the print
position right or left. Does not change the line-spacing
setting.
Set page length ton lines
MODE ASCII Decimal Hexadecimal
Both
<E SC> "C" n 27 67 n IB 43 n
Sets the page length to n lines at the current line spac-
ing, where n is between 1 and 127.
Changing the line spacing later does not alter the physi-
cal page length. The current line becomes the first line of
a new page.
Set page length ton inches
MODE ASCII Decimal Hexadecimal
Both'
<E SC> "C" <O> n 27 67 0 n IB 43 00 n
Sets the page length to n inches, where n is between 1
and 32 in Standard mode or between 1 and 64 in IBM
mode. The current line becomes the first line of a new
page.
Set top of page at current position
MODE ASCII
Decimal Hexadecimal
IBM
<Esc> "4" 27 52 IB 34
Sets the current position as the top-of-page (top-of-form)
position.
Page127