Advertisement
Possible cause
1Action
I
The print gap is not set
correctly.
The ribbon is jammed,
twisted or not set properly
Use the adjustment lever to
set the print gap. Move the
lever to a higher (lighter)
setting. See Setting the print
gap on page 63 of
Chapter 4.
Make sure that the ribbon
cartridge is correctly
between the print head and ! installed. Refer to Preparing
the print head shield.
~the printer on page 9 of
~Chapter 2.
...——
Print head shield is '-
Return the printer to your
damaged or missing.
dealer for repair.
Page
96
Advertisement
