Star Micronics NX-2450 User Manual page 103

I
Possible cause
Auto line feed with carriage
return is not selected.
Paper is jamming.
1
Action
Check Electronic DIP
Switch setting A5, Turn the
setting to OFF to select
automatic line feed (see
Making Electronic DIP
Switch settings on page 37
of Chapter 4).
Check the print gap. If
necessary, use the
adjustment lever to set the
print gap. See Setting the
print gap on page 63 of
Chapter 4.
Action
Adjust the auto load
position (see Setting the
auto load position on
page 60 of Chapter 4.)
Check Electronic DIP
Switch setting A5. Turn the
setting ON to turn off
automatic line feed (see
Making Electronic DIP
Switch settings
on
page 37
of Chapter 4).
Page
94