Advertisement
Next comes the dot data. Normal character height is 24
dots, so there must be 3 x ml bytes of dot data. If the
printer is in super/subscript mode, however, the char-
acter height is 16 dots, so there must be 2 x ml bytes of
dot data.
Each data byte represents eight vertical dots, with the
most significant bit representing the top dot, and the
least significant bit representing the bottom dot.
Select download characterset
MODE
ASCII
Decimal
Hexadecimal
Std.
<E SC> "% " <1>
27 37 1
IB 25 01
Selects the download character set. Ignored when EDS
switch A3 is ON.
SelectROM characterset
MODE
ASCII
Decimal
Hexadecimal
Std.
<ESC> "%"
<O>
27 37 0
IB 25 00
Stops using the download character set and returns to
the built-in ROM character set. Ignored when EDS
switch A3 is ON.
Page139
Advertisement
