Advertisement
Printer beep tones
The printer beeps both to warn you that something is
wrong and to indicate various aspects of normal opera-
tion, for example, to indicate that a particular setting or
selection has just been made. The table below gives a
full list of printer beeps and their meanings
Tone sequence
Meaning
Single tone lasting 2 seconds
The printer has detected an error condition. Switch
the printer off and on again.
Single tone lasting several
The printer has detected an error condition. Switch
seconds
the printer off and on again.
Four short tones, repeated
The printer is out of paper
twice
Single short tone
One of the following:
Vertical alignment mode has been selected
Zoom resolution has been set to
50~0
Quiet
mode has been selected
Electronic DIP Switch mode has been selected
Two short tones
One of the following:
Macro (saved settings) mode has been selected
Zoom resolution has been set to 67Y0
Quiet mode has been cancelled
Three short torfes
Macro (saved settings) mode has been cancelled
Single quarter tone
One of the following:
Hexadecimal dump mode has been selected
.
Prevention of software font selection has been
selected
Zoom resolution has been set to 10OYO (i.e.
zoom is canceled).
Page150
Advertisement
