Star Micronics NX-2450 User Manual page 92

I
Serial-to-parallel interface converter
You can connect the printer to your computer via one of
your computer's serial ports using the serial-to-parallel
converter (SPC-8K). To do this, you will also need an
additional serial converter cable.
To connect the printer to your computer using the
serial-to-parallel converter, proceed as follows (you will
also find it helpful to refer to the SPC-8K User's Manual
and your MS-DOS or Windows User's Guide).
Connecting the serial-to-parallel converter
Serial connector
Clear button ~"
Centronics connector
Turn off the printer and unplug the printer's power
cable.
Page 83