Star Micronics NX-2450 User Manual page 150

Delete last charactersent
MODE ASCII Decimal Hexadecimal
Std.
<DEL> 127
7F
Deletes the last character received. Ignored if the last
character received has already been printed, or if the
last character received was part of a command.
Cancellast line
MODE ASCII Decimal Hexadecimal
Both
<CAN>
24 18
Deletes the last line currently in the print buffer.
Set printer off-line
MODE ASCII Decimal Hexadecimal
Std.
<DC3> 19 13
IBM
<E SC> "Q" " $" 27 81 36 IB 51 24
Sets the printer off-line (into not-ready mode). The
printer disregards all subsequent characters and com-
mands except <DC 1>, which puts it back on-line (into
ready mode). The printer's READY indicator will not go
off.
Set printer on-line
MODE ASCII Decimal Hexadecimal
Both
<3C 1>
17
11
Puts the printer back on-line (into ready mode), allow-
ing it to receive and process all subsequent characters
and commands. This command is ignored if the printer
was set off-line (into not-ready mode) by pressing the
- keY on the control Panel.
Page141